It is all in the details
The Acoustic Custom Strip can be assembled entirely to your needs. This side strip is available with 5 different options other than the standard choices such as different heights, thicknesses, and lengths. The Acoustic Custom Strip makes it possible to fit perfectly into the space where you wish to apply the screed. That way, you decide what works best for you.
The versatility of the Acoustic Custom Strip gives you the freedom to choose between tear-off strips, back glue strips, protective flaps with or without glue and even a half-cut incision at the back to connect more easily to the screed underlay.
Time to make your life as convenient as possible with the Acoustic Custom Strip of Abriso Jiffy.


Correct installation
First place the Acoustic Strips or the Acoustic Custom against the upstanding wall or around pipes or tubes, only then install the screed underlay.
Place half of the standard Acoustic Strip or Acoustic Custom under the acoustic underlay. This prevents the final screed from getting into contact with the underlying filling layer or concrete layer.
It is generally prescribed that your side strip should be at least 20 mm above the floor finish. Before installing the skirting boards, the visible part is cut off.
Choose the right height:
Low side strips vary between 100mm and 150mm. These heights are usually used for domestic homes.
Available heights:• 100mm • 120mm • 150mm
High side strips vary between 200mm and 300mm. These heights are often used in industrial buildings and apartments.
Available heights:• 200 mm • 250mm • 300mm
Properties:
Acoustic reduction
Smooth and easy to process
100% recyclable
Easy to cut
Light material
Waterproof
Save time and money with our customisable options
STEP 1: Choose your roll:



STEP 2: Choose your Options




